kid's projects

Two Times the Fun: DIY Reversible Table Runners

September 26, 2017

Holiday entertaining can sometimes feel like a daunting task in the midst of baking all the cookies, hosting out-of-town guests and artfully wrapping every last present. But it doesn’t have to be that way. If you find yourself crafting the perfect “kid’s table” one day and then quickly transforming your dining room into a space that would make Martha Stewart envious the next, you’ll love our new go-to party project: reversible table runners!

With the option of using a kid-friendly design on one side and a more upscale option on the other, you can entertain for two occasions using the same runner. We think that’s a win win! Keep reading to find out how to make this time-saving project for your next celebration.

Add a touch of personalization using your child's artwork on one side of your table runner | Spoonflower Blog

Add a touch of personalization using your child’s artwork on one side of your table runner. See how!

DIY Adjustable Chef Apron with Kid’s Art | Video Tutorial

September 21, 2017

When it comes to kid’s artwork, the turkey handprint is a staple in classrooms around the United States. We love the idea of treating dad, mom or a grandparent to their very own keepsake apron that will last for seasons to come. Plus, kids will be so proud to see their handmade projects come to life around the kitchen table. This project can be adapted to any season or holiday as well, whether you upload your kid’s artwork (find out how to do that here) or choose an elegant or fun design from the Spoonflower Marketplace. You can even go the extra mile and create a coordinating table runner! So let’s get started on this easy adult apron DIY, and don’t forget to grab the free pattern and share with your friends!

How to Create the Chocolate Milk Tent of Your Kid’s Dreams

April 4, 2017

Every kid deserves an after school (re)treat where they can hideaway. This one is next-level! One of our favorite projects featured in the first-ever catalog is SammyK’s chocolate milk tent, which she dreamed up just for us. The fabric is designed in eight 1 yard panels with assembly instructions included. You can shop the fabric here (we recommend choosing our Lightweight Cotton Twill, shown in this example), then follow along with our tutorial below, written by our talented friend Samarra Khaja herself. We won’t blame you if you end up using this more than your kids do…

Samarra: Hey, hey, fine crafty peeps! SammyK (aka Samarra Khaja) here with a fun new project I dreamt up especially for you (fine, fine, technically for the “kids” in your life, but you know you’re going to want one too. I know I do.) So without further ado, here are the sewing and assembly instructions for my SK-original Chocolate Milk Tent:

Step 1: Receive your festive Spoonflower package in the mail and stare at that stack of fabric goodness for a few moments before tearing into it. I like to take dreamy photos like this one first, before busting through the tissue paper to get to the heart of the matter.

Step 2: Cut out all panels along printed edges. Note that all seam allowances are 1” unless noted (this will give enough room to use French seams, if you want to rock fancy stuff like that.) Seam allowances are built into the design area, so just cut away all excess white fabric and your pieces will be ready to sew.

chocolate milk tent fabric by SammyK available on Spoonflower

Step 3: With wrong sides together, pin Panel A to Panel B along Line 1 (as marked). Straight stitch along Line 1.

Step 4: With wrong sides together, pin Panel B to Panel C along Line 2 (as marked). Straight stitch along Line 2.

Step 5: We’ll now call this assembled A+B+C panel the Left Side Panel. Set aside.

chocolate milk tent fabric by SammyK available on Spoonflower left side panel

Step 6: With wrong sides together, pin Panel D to Panel E along Line 3 (as marked). Straight stitch along Line 3.

Step 7: With wrong sides together, pin Panel E to Panel F along Line 4 (as marked). Straight stitch along Line 4.

Step 8: We’ll now call this assembled D+E+F panel the Right Side Panel (with straw).

chocolate milk tent fabric by SammyK available on Spoonflower right side panel

Step 9: With wrong sides together, sew Left Side Panel to Right Side Panel along Line 5 (as marked). Note that this includes the top edge and both sides and curved corners of that topmost panel (as marked). We’ll now call this assembled panel the Center Panel. Set aside.

chocolate milk tent fabric by SammyK available on Spoonflower center panel

Step 10: The right side of Panel G and the left side of Panel H will now need to be hemmed. Using an iron, fold edge of Panel G’s hem (as marked) in ½” and iron flat.

chocolate milk tent fabric by SammyK available on Spoonflower hemming

Step 11: Fold hem over again another ½” to encase raw edge. Iron flat, pin and hem in place.

chocolate milk tent fabric by SammyK available on Spoonflower second hem

Step 12: Repeat this step with Panel H. Once hemmed and sewed, iron them again to set the stitches.

Step 13: Position Panels G and H so they overlap along inner hems (as marked) so that the striped pattern visually aligns seamlessly. Pin together. Starting at the top edge, stitch a rectanglular box over the overlapping fabric, measuring approximately 1.5” wide by 6.5” tall to secure the panels together.

Step 14: With wrong sides together, sew the top edge of assembled Panel G/H to Panel I along Line 6 (as marked). We’ll now call this assembled panel the Front Panel. Set aside.

chocolate milk tent fabric by SammyK available on Spoonflower front panel

Step 15: With wrong sides together, sew Panel J to Panel K along Line 7. We’ll now call this assembled panel the Back Panel.

chocolate milk tent fabric by SammyK available on Spoonflower back panel

Step 16: With reverse side facing out, place the Center Panel over your tent frame structure. Directions on how to create the tent frame structure can be found here. Note: The diameter of the PVC piping used should be 1/2″.

Step 17: Pin the Back Panel, reverse side out, to the back of the Center Panel.

Step 18: Pin the Front Panel, reverse side out, to the front of the Center Panel.

Step 19: Remove entire cover from tent frame structure and sew both the Front Panel and Back Panel in place. Your tent cover is almost complete! The anticipation is IMMENSE!

Step 20: We are now going to hem the entire bottom edge of the newly assembled tent cover.

Step 21: Using an iron to press everything in place, fold up ½” all the way around and then another ½” to encase the raw fabric edge. Pin in if needed. Hem in place.

Step 22. Flip tent cover right side out and iron flat. Slip tent cover over your tent frame, aligning all corners and edges.

Step 23: Using ½” thick foam core, cut a rectangle out that measures 6” x 47.25”. Cut off top two corners at a 45-degree angle.*

23. Insert this foam core board into the inside of the center top of the tent roof (what were original Panels C/F and now look like the topmost edge of a cardboard milk carton). Make sure it rests on the top center PVC pole of the roof. If you’d like, secure the foam core to the topmost horizontal pole with masking tape for added rigidity.

24. Crawl inside tent and enjoy a celebratory chocolate chip cookie in honor of your newly completed Chocolate Milk Tent…after the kids enjoy it first!!! Yay!

xo Samarra

finished chocolate milk tent

About Our Guest Blogger

Samarra Khaja makes happy, beautiful things, inspired by her love of travel, local markets, food and culture, and her young sons.

The daughter of an Indian architect and an Australian painter, Samarra got hooked on making interesting things when she was still a kid, raiding her parent’s high quality art supplies.

She studied for her masters in photography and moved to New York City to work across disciplines as a graphic designer, art director, illustrator and photographer for the likes of The New York Times, the Guggenheim, Bliss, Time Magazine, Victoria’s Secret and Cirque du Soleil, all in her signature whimsical style.

She’s been published and exhibited worldwide and won several awards, but gets the biggest kick from seeing her prize-winning 24’ x 120‘ mural, “Heartbeat Brooklyn” featuring a smiling clawfoot bathtub, bagels on a rollercoaster, and hot-dogs on a ferris wheel, all frolicking and untouched by graffiti on the side of Lowe’s Brooklyn store. Check out Samarra’s latest Skillshare class on how to design surface patterns like a pro.

How to Make Your Own Custom Vintage NASA Posters

February 7, 2017

With the recent launch of the new Lightweight Cotton Twill and NASA’s release of these awesome vintage space tourism posters to the public domain, we saw it as a perfect opportunity to create some custom space-themed wall art canvases. The new Lightweight Cotton Twill prints vibrant colors and has enough stretch to mimic canvas (plus it’s only $26/yd!) and each poster was less than $20 including materials! Read on for the full how-to.

Make a Fabric Play Crown in an Hour or Less

October 2, 2012

This week Anda Corrie from Etsy shares a tutorial for making a fabric play crown, a favorite dress up accessory and an instant Halloween costume!

make your own adorable, soft fabric play crown for your kiddo (or for you!)

After making my 4-year-old her first paper play crown, she began entreating me to make them for her nearly constantly. Suffice it to say they are one of her favorite go-to dress up accessories.

As Halloween grows closer, I started thinking about how to adapt our crown making into a more durable version and also use some of the Spoonflower fabric I’ve been hoarding in my sewing room! Need an instant costume? Here’s a quick tutorial for a play crown you can make in an hour or less.

You will need:

-two 24” x 6” pieces of Spoonflower quilting weight cotton fabric (either Kona or basic cotton will work well)

-24” length of ½” double-fold bias tape

-one piece of 24″ x 6” card stock

-sewing machine

-scissors

-fabric pen

-ruler

-stapler, or needle and matching thread

1. Measure your royal’s head circumference. Add 1½” to this measurement.

2. Draw a basic crown shape (straight line along the bottom, pointy triangles along the top) the length you’ve measured on heavy card stock. (Or download this free pattern, print and glue to the card stock and then cut out.)

3. Trace the shape onto the back of your fabric with a fabric pen and then add ½” seam allowance. Set aside the card stock pattern for later use.

4. Cut two pieces of fabric from this pattern, for both the outside and inside of the crown.

5. With right sides facing in, sew a straight stitch ⅜” from the edge of the sides and top points of the crown. Leave the bottom edge open.

6. Notch the top of the crown’s points and in between each point as well. Turn right-side out and press.

7. Slide the card stock pattern inside the crown.

8. Straight stitch the bias tape along the bottom edge of the crown.

9. At this point, I like to check the fit again on the intended king or queen’s head before closing it up.

10. Finish by hand stitching the crown closed—or in a pinch you can staple it shut and cover the inside staple ends with washi tape to prevent snagging your highness’s coiffure.

About Our Guest Blogger

Anda Corrie is an American illustrator, Etsy designer, and émigré living in Berlin, Germany with her small family. In her spare time she obsesses over vintage children’s books, makes homemade schnapps, sews tiny dresses that her 4-year-old stubbornly refuses to wear, and draws. Visit her Spoonflower shop for some lovely hand drawn fabric designs and her Etsy shop, Boosterseat.

Main navigation

kid's projects

About Our Guest Blogger

About Our Guest Blogger