5 Easy Steps to Hang Curtains With Confidence 

*Updated September 2025

Do your windows need some decorating? Or maybe you’re stuck with drapery that had already been installed when you moved in because it seemed easier than trying to change them. You’re not alone. Given all the factors involved, upping your window dressing can seem overwhelming. But never fear — this post is for anyone who has coveted curtains but has never known where to start. The Brownstone Boys are here to help you go from “curtain confused” to “curtain confident!” Click here if you’re ready to browse some of the Brownstone Boys’ favorite Spoonflower designs.

The Brownstone Boys: Hanging curtains is one of those interior design jobs that can get complicated fast, given all the aspects of the project at hand. Do you hang them at the top of the window or up to the ceiling above? How much space should you leave on either side? How long should they be?

All questions that are sure to come up as soon as you actually pick up the curtains and rod and bring them to the window. As much as we’d like to say there’s one clear answer that applies to every window and curtain, it’ll depend on the type of window, the type of curtain and the style of room you’re going for. Luckily, there are some ground rules you can use to determine the best way to go about it.  

Be sure to measure and assess the window as well as the room it’s in. Asking yourself these questions and noting your answers will make the rest of the process so much easier. Once you have your answers, you’ll be able to use them to determine what size curtain panels you’ll need, how many panels to buy and where you should hang them. 

• How wide and tall is your window?  
• How close to the ceiling is your window?  
• Is there crown molding on the ceiling?  
• Is there a wall, door or another window close to this one?  
• What sort of style does your room have already, or what style do you envision for it with this project? 

Standard curtain lengths are usually 84”, 96” and 108.” While it may vary, the width of many curtain panels is generally somewhere around 50” when fully stretched out. Next up, we’ll figure out where to hang our curtains, and then move on to how many curtains you’ll need based on the measurements you learned in this section.  

Let’s start with how high you’ll want to hang your curtains. Most windows will look best when the curtains go up to the ceiling on either side. Hanging the curtains right at the top of the window can make it look shorter and even make your ceiling height look lower. With that in mind, remember that there are certain situations where this isn’t possible, or where another option might look better. These are general guidelines. You know your place best!  

If your space has crown molding, you’ll need to hang your curtains just below the molding. Additionally, if your ceiling happens to be exceptionally high, and the top of your window doesn’t come anywhere close to the ceiling, that’s also a good reason to bring your curtains down to just above the window. In some cases where windows are recessed into thicker walls, or where there’s ornate window molding you don’t want to cover, it may be best to mount your curtains within the window frame.  

With the above guidance in mind, think about how high you’ll want to hang your curtains. You may want to play around with a few different options and see what you prefer. Once you know the height you’d like to hang them up top, measure that distance and write down (or draw a sketch!) what you discovered so that you’re not second guessing yourself once you order your curtains.  

Let’s tackle the width of your new curtains!

A good rule of thumb for the width of each curtain panel is for it to be at least 1.5 times the width of the entire window. While this means that one curtain panel can cover your entire window, this means that when you close your curtains they will remain pleated and full and aren’t pulled tight and flat. 

If you want your curtains to seem even fuller or if they’re made from a thin material, you can go up to three times the width. Please note that this may mean getting multiple panels for each window side depending on the width of your window.  

In terms of width, generally speaking, curtains should cover the window trim on either side of the window. To ensure your curtains stay in place once they’re installed, it’s important to have at least one ring, loop or grommet on the outer side of the bracket. This ensures that your curtains fully close vs. having the sides pull in toward the center of the window instead.

When thinking about where to install the brackets for your curtains, remember that your curtain rods may extend past the brackets. Therefore, think in terms of where you want the rods to go, then work backward from there with where to place the brackets. Now that you know where you’ll be hanging your curtains and how many panels you’ll need, let’s look at what different curtain hanging methods are out there.  

Once you’ve decided where your curtains should go, it’s time to evaluate the curtains themselves. A great place to start is with the mounting method. There are various ways to attache curtains to their rods, but the most common are rod pockets, loops/tabs, hooks and grommets. (Note: Spoonflower’s curtains are hand-sewn with both rod pockets and top-tabs.)  

Rod pockets are where the top of the curtain is folded over and sewn with openings on either side. You slip the whole curtain into the rod directly. This is the easiest way to mount curtains! With this hanging method, the curtain fabric can (in some cases) stay fairly wide at the top. When you open the curtains, they scrunch up on the curtain rod and leave rod brackets exposed. If you don’t want this exposure, you can place the curtain rod behind a valence.  

Loops or tabs are fabric loops that have been sewn onto the back of each curtain panel. For installation, you can easily slip the curtain rod through the fabric loops. With this hanging method, you can open your curtains wider than those with a rod pocket. Additionally, you can place one or two fabric loops outside of the rod bracket so that it’s concealed and all the fabric loops aren’t pulled in with the rest of the curtain when it’s closed. Compared to other hanging methods, these fabric loops can be a bit harder to pull back and forth. If you have an extendable rod with a seam in it, the loops are more likely to catch on the seam than they are on rods without a seam.   

Grommeted curtains have large holes punched in the top of the curtain with metal grommets surrounding them. For installation, you slip the rod through the grommets. This hanging method has all the benefits of the loop curtain, and the metal grommets make the curtain easier to pull back and forth. Keep in mind that grommets give your curtains a specific look that may not work in every space. Due due to the way the curtain goes on the rod, you’ll be able to see the rod between every other pleat.  

Hooks allow you to attach the curtain to rings. This is the most expensive and time consuming hanging method and means that the curtains have had hook loops sewn into the back of them. Usually the loops sewn onto these curtains are constructed so that the hooks can be mounted at different heights. This allows you the choice of rings that are exposed or mounted so the top of the curtains extends over the rings and hides them. These hooks can also be inserted in a way that creates permanent pleats, which stay in place even when the curtain is pulled closed for a more formal look. Since the hooks attach to the rings, this makes them very easy to pull back and forth. 

With the sections above, you’ve determined the height and width of your curtains and how you’d like to hang them. Here are a few more things to keep in mind before you hang your new curtains.

One layer or two? While a single layer of curtains can work perfectly, in some cases you could add an additional sheer layer underneath. This additional layer gives a bit more privacy, filters sunlight in bright rooms or adds some drama to your space. If you decide to add a sheer layer, use a double rod. This way you can open and close the sheer layer independently of the curtains.  

If you want a modern look, the curtains should come down to the level of the floor so they’re almost touching. The pleating should also be more relaxed. They should hang straight down without any tiebacks. If this is the look you’re going for, you may need to adjust your curtain’s height measurements accordingly.  

If you want a traditional look, you can pool the curtains on the floor. Make sure they’re not too long so they don’t start to pile up. The pleats should be more uniform, even creating permanent pleats with mounting hooks. You can also have the curtains stay stationary on the rod in the fully closed position, and pull back the curtains lower down, keeping them open and swagged with a tie back for a more formal traditional look. Again, if this is the look you’re going for, you may need to adjust your curtain’s height measurements accordingly. 

While these hanging tips will work in most cases, remember that they’re just guidelines. What’s most important in your home decor is that you’re doing what feels best for your unique situation, personality and space. At the end of the day, if you’re happy with the way it looks then you’ve already done it right. 

Thank you to the Brownstone Boys for sharing these helpful tips on how to hang curtains! If you liked their tips and decided to hang Spoonflower curtains in your space, be sure to share by tagging @spoonflower on your social media. We love to see how you bring Spoonflower home decor to life in your home!