Brand new school supplies are one of life’s great joys. The smell of a fresh pack of pencils, the feeling of tearing the plastic off a stack of pristine notebook paper.  Ahhh. Can we repeat 3rd grade, please? Designer and maker extraordinaire Ceri Staziker stops by the blog today to show us how to make custom, personalized notebook covers so your kid can feel like the coolest in the room on day one. Read on for the quick and simple how-to. 

PIC 1-edited

PIC 14-edited2

Ceri: This is an easy tutorial for sewing a notebook cover. It works with any fabric, and is a great opportunity for personalization by using Spoonflower to print your own design. This particular design is very easy to set up as it is simply a series of ruled lines, imitating notepaper!

The covers make great gifts and were originally conceived as end-of-year teacher gifts. They are reusable, and machine washable.

You will need:  

  • A hard-back notebook (spiral bound works best).
  • Half a yard of fabric — you may need more or less depending on the size of the notebook. I was able to print covers for two A5 notebooks on a yard of Petal Signature Cotton®
  • Iron-on (fusible) interfacing — enough for two pockets.

How to calculate the dimensions of your pattern pieces:

  1. Measure the width of your opened notebook (A).  Decide on the desired width of your inner flaps (B).
  2. A plus B plus B plus 3″ = fabric width for outer and inner covers.
  3. Measure the height of your notebook (C). C + 1.5 inches = fabric height for outer and inner covers.
  4. B minus 1/2 inch = width of pocket fabric (height of pocket can be anything you want as long as its less than C).



How to sew your notebook cover:

4. Cut out an OUTER COVER, an INNER COVER and two POCKETS.cut out all of your pieces5. Iron on the interfacing to the wrong side of both POCKETS. This will make them sturdier and will stop the raw edges inside the pockets from fraying.

6. Fold over 1/4 inch hems on all edges of the pockets and press. Machine sew along the top edge of each pocket. Press again.Fold over 1/4 inch hems on all edges of the pockets and press.

7. Pin the pockets onto the right side of the OUTER COVER. Position the pockets 1 inch away from the side edges (see image below).pinning your pockets in place

8. Machine sew, close to the edges along three sides, leaving the top open to form the pocket. carefully machine stitch your pockets in place

9. Placing right sides together, pin the OUTER COVER to the INNER COVER.pin the outer cover to the inner cover

10. Machine sew along all four edges (seam allowance 1/2 inch), leaving a gap of about 4 inches for turning. Clip the corners.stitch your inner and outer cover together, right sides facing

11. Press seams open and turn the covers the right way around and press. There is NO NEED to sew up the open gap.turn your cover right sides out

12. Fold in the covers to create two flaps. The overall width should now be 2 inches wider than your open notebook. Pin in place.fold in covers to create two flaps

13. Machine topstitch along all edges. The open gap will be automatically sewn closed. Press.machine topstitch around all edges. you're done!

14. Insert the notebook covers into the flaps. You’re finished! For more back-to-school projects, check out our Pinterest board full of DIY’s and other quick projects.

PIC 2-edited

Need more DIY projects? Check out our Back to School DIYs roundup for 41 awesome projects to get your creativity flowing!

About our Guest Author
6a01b8d1a310a1970c01b8d1aa119c970c-800wi (1)

Ceri Staziker is a freelance graphic designer, working from home in an old cottage in the countryside on the outskirts of Cardiff (the capital city of Wales). She loves to photograph her morning walks and sewing projects which she documents on Instagram (@cerigwen). Nothing gives her more pleasure than working with fabrics she has designed herself.